|
Abbiss, C P. 1981. Shear wave measurements of the elasticity of the ground. GÉotechnique, 31, 91–104.[ISI][GeoRef]
Abbiss, C P. 1983. Calculation of elasticities and settlements for long periods of time and high strains from seismic measurements. GÉotechnique, 33, 397–405.[ISI][GeoRef]
Ackworth, I, Kelly, B & Jankowski, J. 1994. Improved contamination assessment of a domestic landfill using integrated geophysical, geochemical and hydrogeological methods. Water Down Under `94, Adelaide, 21–25 November 1994. 235–240.
Adams, S, McDowell, W & Hart, P A. 1992. Ground conditions at Lion Salt Works Site, Marsden, Cheshire. Proceedings of the 4th International Conference on ground movements and structures, Cardiff. 443–458.
American Society For Testing Materials (ASTM). 1995. Standard Guide for Planning and Conducting Borehole Geophysical Logging. ASTM Designation: D5753-95, Philadelphia. 8 pp.
American Society Of Civil Engineers. 1998. ASCE Standard Seismic Analysis of Safety-Related Nuclear Structures and Commentary, 4–98.
Annan, A P. 1992. Ground penetrating radar - workshop notes. Sensors and Software Inc, Canada, 128.
Anon. 1981. Suggested method for porosity/density determination using saturation buoyancy techniques. In: Brown, E T (ed.) Rock characterisation testing and monitoring, ISRM suggested methods. Pergamon Press, Commission on Testing Methods, International Society for Rock Mechanics.
Anon. 1988. Geological Society Engineering Group Working Party Report on Engineering Geophysics. Quarterly Journal of Engineering Geology, 21, 207–227.
Anon. 1997. Guidance on radar testing of concrete structures. Concrete Society Technical Report 48. 88 pp.
Arandjelovic, D. 1966. Geophysical methods used in solving some geological problems encountered in the construction of the Trebisnjica Water Power Plant, Yugoslavia. Geophysical Prospecting, 14, 80–97.[CrossRef][GeoRef]
Archie, G E. 1942. The electrical resistivity log as an aid in determining some reservoir characteristics Petroleum Technology 5: 1–8. Trans. AIME, 146, 54–62.
Arthur, J C R, Phillips, G & McCormick, C R. 1997. High definition seismic for Channel Tunnel marine route, Modern Geophysics in Engineering Geology. Engineering Group of the Geological Society 30th Anniversary Conference Liege, 347–354.
ASTM. 1995. Standard Guide for Planning and Conducting Borehole Geophysical Logging, American Society for Testing Materials, Designation: D 5753-95, 8 pp.
Atkinson, J H. 2000. Non-linear soil stiffness in routine design (Forty-fourth Rankine Lecture). Geotechnique, 50(5), 485–508.[ISI]
Backus, G E. 1962. Long wave elastic anisotropy produced by horizontal layering. Journal of Geophysical Research, 67, 4427–4440.
Baoshan, Z & Chopin, L. 1983. Shear wave velocity and geotechnical properties of tailings deposits. Bulletin International Association Engineering Geology, 26–27, 347–353.
Baria, R, Jackson, P D & McCann, D M. 1989. Further development of a high-frequency seismic source for use in boreholes. Geophysical Prospecting, 37, 31–52.[CrossRef][ISI][GeoRef]
Barker, R D. 1983. Comparison of geophysical techniques over the Cliffe Hill Markfieldite, Leicestershire. Prospecting and evaluation of non-metallic rocks and minerals. Institution of Geologists, London, 57–68.
Barker, R D. 1997. Electrical imaging and its application in engineering investigations. In: McCann, D M, Eddleston, M, Fenning, P J & Reeves, G M (eds) Modern Geophysics in Engineering, Geological Society Special Publication 12, 37–43.
Barker, R D & Harker, D. 1984. The location of the Stour buried tunnel-valley using geophysical techniques. Quarterly Journal of Engineering Geology, Geological Society London 17, 103–115.
Batchelor, A S, Baria, R & Hearn, K. 1983. Monitoring the effects of hydraulic stimulation by microseismic location: a case study. 58th Annual Technical Conference Society of Petroleum Engineers, American Institute of Mining, Metallurgical and Petroleum Engineers, San Francisco. 1–12.
Bates, R C. 1992. Environmental geophysics in the US; a brief overview. Geoscientist, 2(2), 8–11.[GeoRef]
Bell, F G. 1988. Land development. State of the art in the location of old mine shafts. Bulletin of Engineering Geology, 37, 91–98.[CrossRef]
Benson, R C & Noel, M R. 1983. Geophysical techniques for surveying buried wastes and waste investigation. Environmental Monitoring System Laboratory, Report No 68-03-3050. United States Environmental Protection Agency, Las Vegas.
Berry, K M, Cooling, T L & McCaskie, S L. 1995. Soil property determination for a seismic study. Third International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics. 3, 1073–1077, Paper 1.59.
Bieniawski, Z T. 1978. Determining rock mass deformability: Experience from case histories. International Journal of Rock Mechanics, Mining Sciences and Geomechanics Abstracts, 15, 237–247.[CrossRef]
Biot, M A. 1956. Theory of propagation of elastic waves in a fluid saturated porous solid. Journal of the Acoustical Society of America, 28, 168–191.[Medline]
Bishop, I & Koor, N P. 2000. Integrated geophysical and geotechnical investigations of old masonry retaining walls in Hong Kong. Quarterly Journal of Engineering Geology and Hydrogeology, 33, 335–349.
Black, A J. 1986. Borehole gravity surveys, current instrumentation capabilities and applications. In: Killeen, P G (ed.) Borehole geophysics for mining and geological applications, Geological Survey of Canada, Publication 85–27, 181–188.
Bogoslovsky, V A & Ogilvy, A A. 1977. Geophysical methods for the investigation of landslides. Geophysics, 42, 562–571.[CrossRef][ISI][GeoRef]
Boore, D M & Brown, L T. 1998. Comparing shear-wave velocity profiles from inversion of surface-wave phase velocities with downhole measurements: Systematic differences between the CXW method and downhole measurements at six USC strong motion sites. Seismological Research Letters, 69(3), 222–229.[GeoRef]
Brabham, P J & McDonald, R J. 1997. On-shore geophysical methods for coastal and waterway site investigation. In: McCann, D M, Fenning, P, Eddlestone, M & Cripps, J (eds) Modern Geophysics in Engineering Geology. Papers from the 30th Annual Conference of the Engineering Group of the Geological Society, Leige, Belgium, 1994. 327–336.
Bray, D E & McBride, D. 1992. Non-Destructive Testing Techniques. Wiley, 113–146, Chapter 7, Radiography.
BS 1881. 1986. Testing concrete Part 203: Recommendations for measurement of velocity of ultrasound pulses in concrete. BSI, London.
BS 2600 (eds) Radiographic examination of fusion welded butt joints in steel: Part 1: (1983) Methods for steel 2 mm up to and including 50 mm thick. BSI, London. Part 2: (1973) Methods for steel over 50 mm and up to and including 200 mm thick.
BS 4124. 1991. Methods of ultrasonic detection of imperfections in steel forgings. BSI, London.
BS 5930. 1999. Code of Practice for Site Investigations. BSI, London.
BS 6089. 1981. Guide to assessment of concrete strength in existing structures. BSI, London.
BS 6208. 1990. Methods for ultrasonic testing of ferric steel castings including quality levels. BSI, London.
CP 1021. 1973. Code of practice for cathodic protection. BSI, London.
CP 2012 (eds) Part 1: Foundations for machinery. BSI, London.
ISO 9000-1. 1994. Quality management and quality assurance standards Guidelines for selection and use. BSI, London.
Broadbent, C D. 1974. Predictable blasting with in-situ seismic surveys. Mining Engineering, 26, 37–41.[GeoRef]
Brown, R J S. 1980. Connection between formation factor for electrical resistivity and fluid solid coupling, in Biots equations for acoustic waves in fluid filled porous media. Geophysics, 45, 1269–1275.[CrossRef][ISI][GeoRef]
Bungey, J H. 1994. The Testing of Concrete in Structures, 2nd edn. Chapman and Hall, London. 228 pp.
Buselli, G, Barber, C, Dams, G B & Salama, R B. 1990. Detection of groundwater contamination near waste disposal sites with transient electromagnetic and electrical methods. In: Ward, S H (ed.) Geotechnical and environmental geophysics, 2, Tulsa Society of Exploration Geophysicists, 27–39.
Butcher, A P & McElmeel, K. 1993. The ability of in-situ testing to assess ground improvement. Proceedings of the Engineered Fills Conference, Newcastle upon Tyne, 15–17 September. 529–540. Thomas, Telford.
Butcher, A P & Lord, J A. 1993. Engineering properties of the Gault clay in and around Cambridge, UK. UK Proc. Int. Symp. Geotechnical Engineering of Hard Soils - Soft Rocks, Athens, 20–23 September. 405–416. Balkema.
Butcher, A P & Powell, J J M. 1997a. Practical considerations for field geophysical techniques used to assess ground stiffness. Proceedings of the International Conference on Advances in Site Investigation Practice, ICE, London, March 1995. 701–714. Thomas Telford.
Butcher, A P & Powell, J J M. 1997b. Determining the modulus of the ground from in-situ geophysical testing. Proceedings of the XIV International Conference on Soil Mechanics and Foundation Engineering, Hamburg. 449–452.
Butcher, A P & Tam, W S A. 1997. The use of Rayleigh waves to detect the depth of a shallow landfill. In: McCann, D M, Eddleston, M, Fenning, P J & Reeves, G M (eds) Modern Geophysics in Engineering Geology, Geological Society, London, Engineering Geology Special Publication, 12, 97–102.
Butler, D J & Llopis, J L. 1990. Assessment of anomalous seepage conditions. In: Ward, S H (ed.) Geotechnical and Environmental Geophysics, Volume 2 Environmental Groundwater. Society of Exploration Geophysicists, Tulsa, 153–173.
Coewin, R F & Olhoeft, G. 1991. Comprehensive geophysics investigation of an existing dam foundation. Geophysics: The Leading Edge, 9(9), 44–53.
Cadnam, J D & Goodman, R E. 1967. Landslide noise. Science, 158, 1182–1184.
Carpenter, P J, Calkin, S F & Kaufmann, R S. 1991. Assessing a fractured landfill cover using electrical resistivity and seismic refraction techniques. Geophysics, 56(11), 1896–1904.[CrossRef][ISI][GeoRef]
Cartmell, S J, Conn, P J & Pugh, T D. 1997. An example of the use of crosshole tomography in dam wall foundation studies. In: McCann, D M, Fenning, P J & Reeves, G M (eds) Modern Geophysics in Engineering Geology, Geological Society Engineering Geology Special Publication 12, 143–153.
Caterpillar Tractor Company. 1988. Handbook of Ripping (8th Edition). Caterpillar Inc, Peoria, Illinois. 33 pp.
Chambers, J, Ogilvy, R, Meldrum, P & Nissen, J. 1999. 3D resistivity imaging of buried oil-and tar-contaminated waste deposits. European Journal of Environmental and Engineering Geophysics, 4, 3–14.
Clarke, M R & Cornwell, J D. 1983. The buried glacial channels of the Woolpit (Suffolk) area — a preliminary report. London, Institute of Geological Sciences Report 83/10, 31–36.
Clayton, C R I, Gunk, M J, Hope, V S, Matthews, M C & McDowell, P W. 1990. An assessment of seismic tomography as a means of detecting voids in salt deposits. Proceedings of the 6th International IAEF Conference, Rotterdam. 907–912.
Clayton, C R I, Simons, N E & Matthews, M C. 1982. Site Investigation. Granada Publishing, London.
Coleman, A R. 1991. The use of the self potential method in the delineation of a reclaimed landfill site. Proceedings of the Conference on Planning and Engineering of Landfills, University of Birmingham, 10th–11th July. The Midlands Geotechnical Society.
Comite European De Normalisation (CEN). 1998. Eurocode 8: Design of structures for earthquake resistance. (EN1998).
Committee On Earthquake Engineering 1985. National Research Council, USA.
Constable, S C, Parker, R L & Constable, C G. 1987. Occams inversion — a practical algorithm for generating smooth models from electromagnetic sounding data. Geophysics, 52, 289–300.[CrossRef][ISI][GeoRef]
Conway, B W, McCann, D M, Sarginson, M & Floyd, R A. 1985. A geophysical survey of the Crouch/Roach river system in South Essex with special reference to buried channels. Quarterly Journal of Engineering Geology, 17, 269–282.[CrossRef]
Coon, R F. 1968. Correlation of engineering behaviour with the classification of in-situ rock. PhD thesis. University of Illinois.
Corin, L, Couchard, I, Dethy, B, Halleux, L, Modoie, A, Richter, T & Wauters, J P. 1997. Radar tomography applied to foundation design in a karstic environment. In: McCann, D M, Fenning, P J & Reeves, G M (eds) Modern Geophysics in Engineering Geology, Engineering Group Special Publication 12, 169–175.
Corwin, R F. 1990. The self potential method for environmental and engineering applications. In: Ward, S H (ed.) Geotechnical and environmental geophysics, 1, Soc. of Expl. Geophys. Tulsa, 127–145.
Crampin, S. 1981. A review of wave motion in anisotropic and cracked elastic media. Wave Motion, 3, 343–391.[CrossRef][ISI][GeoRef]
Cratchley, C R, Grainger, P, McCann, D M & Smith, D I. 1972. Some applications of geophysical techniques in engineering geology with special reference to the Foyers Hydroelectric Scheme. 24th International Geological Congress, Montreal. 163–175, Section 13.
Cripps, A C & McCann, D M. 2000. The use of the natural gamma log in engineering geological investigations. Engineering Geology, 55, 313–324.[CrossRef][ISI][GeoRef]
Cuellar, V. 1997. Geotechnical applications of the spectral analysis of surface waves. In: McCann, D M, Eddleston, M, Fenning, P J & Reeves, G M (eds) Modern Geophysics in Engineering Geology, Geological Society, London, Engineering Geology Special Publications, 12, 53–62.
Culshaw, M, Jackson, P D & McCann, D M. 1987. Geophysical mapping techniques in environmental planning. In: Culshaw, M G, Bell, F G, Cripps, A C & OHara, M (eds) Planning and Engineering Geology, Geological Society, London, Engineering Geology Special Publications, 4, 171–177.
Daily, W, Ramirez, A, Labrecque, D & Nitao, J. 1992. Electrical resistivity tomography of vadose water movement. Water Resources Research, 28(5), 1429–1442.[CrossRef][ISI][GeoRef]
Danbom, S H. 1995. Environmental Geophysics —A matter of scale. Geotimes, 40, 4, May 5 1995.[ISI][GeoRef]
Darracott, B W & Lake, M I. 1982. An initial appraisal of ground probing radar for site investigation in Britain. Ground Engineering, 14, April, 14–18.
Darton, D M, Dingwall, R G & McCann, D M. 1981. Geological and geophysical investigations in Lyme Bay. London, Institute of Geological Sciences Report 79/10.
Davis, A G & Dunk, C S. 1974. From theory to field experience with nondestructive vibration testing of piles. Proceedings of the Institution of Civil Engineers Part 2, December 1974, 57, 571–593.
Deere, D U, Hendron, A J, jr, Patton, F D & Cording, E J. 1967. Design of surface and near-surface construction in rock. Proceedings of the 8th Symposium on Rock Mechanics, University of Minnesota, 1966. 237–302.
Denness, B, Conway, B W, McCann, D M & Grainger, P. 1975. Investigation of a coastal landslip at Charmouth, Dorset. Quarterly Journal of Engineering Geology, 8, 119–140.
Department Of The Environment. Reclamation of derelict land: procedure for locating abandoned mine-shafts 1976. Contract DGR 482/13, Department of the Environment, London. Report by Ove Amp & Partners.
Donnelly, L J, Dumpleton, S, Culshaw, M G, Sahedlock, S L & McCann, D M. 1998. The legacy of abandoned mining in the urban environment in the UK. Proceedings of the F fth International Conference on re-use of Contaminated Land and Landfills, Brunei University London, 7–9th July 1998. Engineering Technics Press Edited by M C Forde.
Dumbleton, M J & West, G. 1974. Guidance on planning, directing and reporting site investigations. Transport and Road Research Laboratory Report 625 Crowthorne.
Dutta, N P, Boss, R N & Saikia, B C. 1970. Detection of solution channels in limestone by electrical resistivity method. Geophysical Prospecting, 18, 405–414.[CrossRef][GeoRef]
Dyvik, R & Madshus, C. 1985. Laboratory measurement of Gmax using bender elements. Proceedings of the ASCE Annual Convention: Advances in the art of testing soils under cyclic conditions, Detroit, Michigan.
Eiswirth, M, Hotzl, H, Lazar, C & Merkler, G. 1995. Detection of contaminant transport from damaged sewerage systems and leaky landfills. Proceedings of the conference for Groundwater Quality: Remediation and Protection, Prague, May 1995, 225, 337–346. AHS.
El-Naqa, A. 1996. Assessment of geomechanical characterisation of a rock mass using a seismic geophysical technique. Geotechnical and Geological Engineering, 14, 291–305.[CrossRef][GeoRef]
Engineering Group Of The Geological Society 1982. The Working Party Report on Terrain Evaluation. Quarterly Journal of Engineering Geology 1982.
Engineering Group Of The Geological Society 1988. The Working Party Report on Engineering Geophysics. Quarterly Journal of Engineering Geology, 21, 207–227.
Engineering Group Of The Geological Society 1993. Aggregates — Sand, gravel and crushed rock aggregates for construction purposes, Geological Society Special Publication 9. London.
Evans, R & Lee, M K. 1994. Imaging the Earths Crust — geophysics at a regional scale. Geoscientist, 4, 18–20.[GeoRef]
Farnan, R A, Piggin, R H & Flavenz, O G. 1994. The use of deep density borehole gravimeter to establish fluid saturation changes to a North Sea reservoir. European Association of Exploration Geophysicists 56th meeting. Technical Programme and abstracts of papers 021.
Federation Internationals De Preconstrainte. 1983. Inspection and maintenance of reinforced and pre-stressed concrete structures, FIP Good Practice Guide.
Fehler, M & Pearson, C. 1984. Cross-hole seismic surveys: applications for studying subsurface fracture systems at a hot dry rock geothermal site. Geophysics, 49, 37–45.[CrossRef][ISI][GeoRef]
Fenning, P J. 1994. Comparative geophysical profiles over a completed landfill site. Proceedings of the Third International Conference on Re-use of Contaminated Land and Landfills, Brunet University London. 279–284. M C Forde, Engineering Technics Press.
Fenning, P J & Veness, K J. 1992. Geophysical methods for the location of underground storage tanks. In: Forde, M C (ed.) Proceedings of the Second International Conference on Construction on Polluted and Contaminated Land, Brunet University London. 51–57. Engineering Technics Press.
Ferguson, C C. 1992. The statistical basis for sampling of contaminated land. Ground Engineering, 25(1).
Field, E G. 1979. Corrosion control in the water industry. Water Services, 83, 609–616.[ISI]
Finch, J W. 1979. An application of surface electrical resistivity methods to the delineation of spoil tip leachate. Proceedings SymposiumThe Engineering Behaviour of Industrial and Urban Fill, University of Birmingham. c35–c44. Midland Geotechnical Society.
Fitzgerald, L J, Angers, A K & Radvill, M E. 1987. The application of VLF equipment to hazardous waste Site Investigation in New England. NUS Corporation.
Flemming, B W. 1976. Side-scan sonar: a practical guide. International Hydrographic Review, 53, 65–92.
Fookes, P G. 1997. Geology for engineers: the geological model, prediction and performance. Quarterly Journal of Engineering Geology, 30, 293–424.[CrossRef][ISI]
Fourney, W L & Dick, R D. 1995. The utilisation of explosive loading as a nondestructive evaluation tool in geologic. materials, International Journal of Solids and Structures, 32(17).
Freeme, C R. 1978. The application of ultrasonic test methods to the determination of elastic moduli of pavement materials. Bulletin of the Association of Engineering Geologists, 15, 63–83.[GeoRef]
Games, K P. 1986. Digital site surveys: recommended acquisition parameters. Hydrographic Journal, 42, 11–18.
Gardner, R. 1983. Seismic refraction as a tool in evaluation of rock quality for dredging and trenching. World Dredging Congress, Singapore, April 1983. 251–262.
Gardener, R. 1992. Seismic refraction as a tool in the evaluation of rock quality for dredging and engineering purposes: case histories. In: Hudson, J A (ed.) Eurock 92. British Geotechnical Society, Chester, 153–158.
Garrett, A. 1991. Occams Razor Physics World, May, 39–42.
Geyer, R L & Myung, J I. 1971. The 3-D velocity log: a tool for in-situ determination of the elastic moduli of rocks. Proceedings of the 12th Symposium on Rock Mechanics, University of Missouri, Rolla, 1970. 71–107.
Gochioco, L M. 1990. eismic surveys for coal exploration and mine planning. The Leading Edge, 9(4), 25–28.[Abstract][GeoRef]
Goldman, M & Neubauer, F M. 1994. Groundwater exploration using integrated geophysical techniques. Surveys in Geophysics, 15, 331–361.[GeoRef]
Gough, D I. 1953. Investigation of foundations by seismic method. South African Institution of Civil Engineers Transactions, 3, 61–70.
Grainger, P, McCann, D M & Gallois, R W. 1973. The application of the seismic refraction technique to the study of the fracturing of the Middle Chalk at Norfolk Mundford. Geotechnique, 2(3), 219–232.
Greenhouse, J P. 1991. Environmental geophysics: its about time. The Leading Edge, 10(1), 32–34.[Abstract][GeoRef]
Greenhouse, M B, Schneider, G, Redman, D, Annan, P, Olhoeft, G, Sander, K & Mazzella, A. 1993. Geophysics and solvents: The Borden Experiment. The Leading Edge, April, 261–267.
Griffiths, D H & Barker, R D. 1993. Two-dimensional resistivity imaging and modelling in areas of complex geology. Journal of Applied Geophysics, 29, 211–226.[CrossRef][ISI][GeoRef]
Gupta, P K, Niwas, S & Gaur, V K. 1997. Straightforward inversion of vertical electric sounding data. Geophysics, 62(3), 775–785.[CrossRef][ISI][GeoRef]
Hagedoorn, J G. 1959. The plus-minus method of interpreting seismic refraction sections. Geophysical Prospecting, 7, 158–182.[CrossRef]
Hall, D H & Hajnal, Z. 1962. The gravimeter in studies of buried valleys. Geophysics, 27, 939–951.[CrossRef][GeoRef]
Hamdi, F & Taylor-Smith, D. 1982. The influence of permeability on compressional wave velocity in marine sediments. Geophysical Prospecting, 30, 622–640.[CrossRef][ISI][GeoRef]
Hardage, B A. 1987. Blending log date, borehole geophysics and surface seismic measurements into unified geological messages. SWPLA 28th Logging Symposium, London, Paper INV AC.
Hardin, B O & Blandford, G E. 1989. Elasticity of particulate materials. Journal of the Geotechnical Engineering Division, ASCE, 115(6), 788–805.
Hardin, B O & Drnvich, V P. 1972. Shear modulus and damping in soils: measurement and parameter effects. Soil Mechanics Foundations Division 98, SM6.
Haskell, N A. 1953. The dispersion of subsurface waves on multilayered media. Bulletin of the Seismological Society of America, 43(1), 17–34.
Health And Safety Commission. 1994. Managing construction for health and safety, Construction (Design and Management) Regulations. Approved Code of Practice. HSE Books, Suffolk.
Hellewell, E G. 1988. The status of old coal mine plans in site investigations. In: Forde, M C (ed.) Proceedings of the Second International Conference on Construction in Areas of Abandoned Mineworkings, Edinburgh, 28–30 June. 9–15. Engineering Technics Press.
Higginbottom, I E. 1976. The use of geophysical methods in engineering geology, Part 2, electrical resistivity, magnetometer and gravity methods. Ground Engineering, 9(2), 21–23.
Hight, D W, Bennel, J D, Chana, B, Davis, P D, Jardine, R J & Porovic, E. 1997. Wave velocity and stiffness measurements of the Crag and Lower London Tertiaries at Sizewell. Géotechnique, 47(3), 451–474.[GeoRef]
Hinze, W J. 1990. The role of gravity and magnetic methods in engineering and environmental studies. In: Ward, S H (ed.) Geotechnical and environmental geophysics, 1, 75–126. Tulsa Society of Exploration Geophysicists.
Hoekstra, P & Blohm, M W. 1990. Case histories of time-domain electromagnetic soundings in environmental geophysics. In: Ward, S H (ed.) Geotechnical and environmental geophysics, 2, 1–15. Society of Exploration Geophysicists, Tulsa.
Houliston, D J, Lauthlin, J & Waugh, G. 1982. Automatic real time event detection for seismic networks. Open file report 159. Global Seismology Research Group, Institute of Geological Sciences, London.
Huggenberger, P, Meir, E & Pugin, A. 1994. Ground Probing radar as a tool for heterogeneity estimation in gravel deposits in Geophysics and Environment. Journal of Applied Geophysics, 31(1–4), 171–184.[CrossRef][ISI][GeoRef]
International Society For Rock Mechanics 1981. Commission on Standardisation of Laboratory and Field Tests.
Ivansson, S. 1985. A study of tomographic velocity estimation in the presence of low velocity zones. Geophysics, 50, 969–988.[CrossRef][ISI][GeoRef]
Jackson, P D & McCann, D M. 1997. Cross-hole seismic tomography for engineering site investigation. In: McCann, D M, Fenning, P J & Reeves, G M (eds) Modern Geophysics in Engineering Geology, Geological Society, London, Engineering Geology Special Publications, 12, 249–266.
Jackson, P D, McCann, D M & Russell, D L. 1987. Geophysical mapping during the planning of new roads: an aid to the detection of mine working. Planning and Engineering Geology, Geological Society, London, Engineering Geology Special Publications, 4, 447–452.[CrossRef]
Jackson, P D, Williams, G M, Ward, R, Meldrum, P & Reece, G. 1992. Electrical Imaging of Groundwater Problems. American Nuclear Society, Winter Meeting, San Francisco, 10–14th November, 1, 178–179.
Johnson, S T. 1994. Rising groundwater levels: engineering and environmental implications. Groundwater problems in urban areas. Thomas Telford, London, 285–298, 1994.
Keyes, W S. 1990. Borehole Geophysics Applied to Ground-Water Investigations. Technical Water-Resources Investigations, Book 2. United States Geological Survey. 150 pp Chapter E2.
Kim, Y S & Tatsuoka, F & OCHI 1994. Deformation characteristics at small strains of sedimentary soft rocks by triaxial compression test. Géotechnique, 44(3), 461–478.[ISI][GeoRef]
King, R A. 1977. A review of soil corrosiveness with particular reference to reinforced earth. TRRL Supplementary Report 316. Transport and Road Research Laboratory, Crowthorne.
Klein, K & Santamarina, J C. 1997. Methods for broad-band dielectric permittivity measurements (soil water mixtures, 5 Hz to 1.3 GHz). Geotechnical Testing Journal, 20, 179–196.
Knight, C J & Matthews, W L. 1976. A landslip study in Tertiary sediments, Northern Tasmania. Bulletin of the International Association of Engineering Geology, 14, 7–22.
Knight, M J, Leonard, J B & Whiteley, R J. 1978. Lucas Heights solid waste landfill and downstream leachate transport — a case study in environmental geology. Bulletin International Association Engineering Geology, 18, 45–64.[CrossRef]
Knill, J L. 1970. The application of seismic methods in the prediction of grout take in rock. In-situ investigations in soils and rocks, Proceedings of a Conference. British Geotechnical Society, London, 93–100.
Krishnamoorthy, K, Goldsmith, W & Sackman, J L. 1974. Measurements of wave processes in isotropic and transversely isotropic elastic rocks. International Journal of Rock Mechanics, Mech. Min. Sci. & Geomech. Abstr. 11, 367–378.[CrossRef]
Kuhn, S H. 1978. Nuclear gauges. Bulletin of the Association of Engineering Geologists, 15, 135–144.[GeoRef]
Kuwano, R, Connolly, T M & Jardine, R J. 2000. Anisotropic stiffness measurements in a stress-path triaxial cell. Geotechnical testing journal, GTJODJ, 23(2), 141–157.
Lapenna, V, Perrone, A, Pietro, L, Piscitelli, S, Rizzo, E & Sdao, F. 2000. 2D resistivity and 3D self potential tomographies in the study of the Giarossa Landslide (Southern Italy). Proceedings of the 6th Meeting of Environmental and Engineering Geophysics, Bochum, Germany.
Lebreton, F, Sarda, J P, Troqueme, F & Morlier, P. 1978. Logging tests in porous media to evaluate the influence of their permeability on acoustic wave forms. Society of Professional Well Log Analysts 19th Annual Symposium, El Paso, Texas. Q1-26.
Lee, F T & Mystkowski, W. 1978. Loveland Basin Slide U.S.A. In: Voight, B (ed.) Rockslides and Avalanches1 Natural Phenomena. Elsevier, Amsterdam, 473–514.
Le Tirant, P. 1979. Seabed Reconnaissance and Offshore Soil Mechanics for the Installation of Petroleum Structures. Technip, Paris.
Lo Presti, D C F, Jamiolkwsi, M B, Pallara, O, Cavalllaro, A & Pedroni, S. 1997. Shear modulus and damping of soils. Geotechnique, 42(3), 603–618.
Luke, M H & Barker, R D. 1996. Rapid least-squares inversion of apparent resistivity pseudosections by a quasi-Newton method. Geophysical Prospecting, 44, 131–152.[CrossRef][ISI][GeoRef]
Loke, M H & Barker, R D. 1996. Practical techniques for 3D resistivity surveys and data inversion. Geophysical Prospecting, 44(3), 499–523.[CrossRef][ISI][GeoRef]
Lomnitz, C. 1994. Fundamentals of Earthquake Prediction. John Wiley and Sons. 328 pp.
Lomnitz, C. 1999. The Road to Total Earthquake Safety. Seventh Mallet Milne Lecture, A A Balkema. 89 pp.
Lungu, D, Alder, A, Moldoveanu, T, Ciugudean, V & Stefanica, M. 1998. Surface geology and dynamical properties of soil layers in Bucharest. In: Wenzel, F & Lungu, D (eds) Vrancea Earthquakes: Tectonics, Hazard and Risk Mitigation. Kluwer Academic Publishers, Dordrecht.
Macdonald, G J & Chartres, F R D. 1994. Geophysical investigations for the A3 Hindhead Tunnel Modern Geophysics in Engineering Geology. Engineering Group of the Geological Society 30th Anniversary Conference, Liege. 459–484.
Mahrer, K D. 1995. Review of the radio frequency (RIM) method and its utilisation in near-surface investigations. The Leading Edge, 14(6), 249–256.[Abstract][CrossRef][GeoRef]
Malagnini, L. 1996. Velocity and attenuation structure of very shallow soils: Evidence for a frequency-dependent. Q, Bulletin of the Seismological Society of America, 85(5), 1471–1486.
Mallard, D & Skipp, B O. 1999. The dynamic properties of the Mercia Mudstone at Oldbury. The engineering properties of the Mercia Mudstone Group, Papers presented at a seminar held at Pride Park, Derby, 25 November 1998. 116–122. CIRIA, London, CIRIA Conference Record 2000-1.
Mathiez, J P & Astier, J L. 1958. SaultuBrenais damsite, refraction seismic survey. Geophysical surveys in mining, hydrological and engineering projects. European Association of Exploration Geophysicists, The Hague, 232–237.
Matthews, M C, Clayton, C R I & Own, Y. 2000. The use of field geophysical techniques to determine geotechnical stiffness parameters. Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, January, 143, 31–42, 2000.
Matthews, M C, Hope, V S & Clayton, C R I. 1997. The use of surface waves in the determination of ground stiffness profiles. Proceedings of the Institution of Civil Engineers Geotechnical Engineering, April, 119(2), 84–95.
Matthews, S L. 1998. Subsurface radar as an investigative technique. Building Research Establishment Report BR 340. CRC, Garston, Watford.
McCann, D M, Culshaw, M G & Fenning, P J. 1997. Setting the standard for geophysical surveys in site investigation. In: McCann, D M, Eddleston, M, Fenning, P J & Reeves, G M (eds) Modern Geophysics in Engineering Geology, Geological Society, London, Engineering Geology Special Publications, 12, 3–34.
McCann, D M, Culshaw, M G & Northmore, K J. 1990. Rock mass assessment from seismic measurements. In: Bell, F G, Culshaw, M G, Cripps, J C & Coffey, J R (eds) Field Testing in Engineering Geology, Geological Society, London, Engineering Geology Special Publications, 6, 257–266.
McCann, D M & Fords, M C. A review of NDT methods in the testing of concrete and masonry structures Non-destructive Testing and Evaluation. Elsevier Press. in press.
McCann, D M & Forster, A. 1990. Reconnaissance geophysical methods in landslide investigations. Engineering Geology, 29, 59–78.[CrossRef][ISI][GeoRef]
McCann, D M & Taylor-Smith, D. 1973. Geotechnical mapping of sea-floor sediments by use of geophysical techniques. Transactions of the Institution of Mining and Metallurgy, Section B, 82, B155–B167.
McCann, D M, Suddaby, D L & Hallam, J R. 1982. The use of geophysical methods in the detection of natural cavities, mineshafts and anomalous ground conditions. Open file report No EG8215. Engineering Geology Unit, Institute of Geological Sciences, London.
McCauley, M L. 1976. Microsonic detection of landslides Transportation Research Board, Transportation Research Record, 581, 25–30.
McDowell, P W. 1975. Detection of clay filled sink-holes in the chalk by geophysical methods. Quarterly Journal of Engineering Geology, 8, 303–310.
McDowell, P W. 1981. Recent developments in geophysical techniques for the rapid location of near-surface anomalous ground conditions by geophysical methods. Ground Engineering, 14, 20–23.
McDowell, P W. 1986. Seismic refraction surveying in urban. areas, Institution of Mining and Metallurgy conference on rock engineering and excavation in an urban environment, Hong Kong. 241–247.
McDowell, P W. 1990. The determination of the dynamic elastic moduli of rock masses by geophysical methods. In: Bell, F G, Culshaw, M G & Cripps, A C (eds) Field testing in Engineering Geology, Geological Society, London, Engineering Geology Special Publications, 6, 267–274.
McDowell, P W. 1993. Seismic investigation for rock engineering. In: Hudson, J A (ed.) Comprehensive rock engineering Volume 3: Rock testing and site characterisation. Pergamon Press, 619–634.
McDowell, P W, Barla, G & Sharp, J C. 1992. Investigation of rock mass characteristics by geophysical methods for an underground storage project site in weak jointed chalk. Proceedings of the ISRM-BGS Symposium EUROCK, Chester. 169–173.
McDowell, P W & Hooper, J W. 1980. The mapping of chalk pinnacles and clay pockets in gravel by electrical resistivity methods. Quarry Management and Products, 7, 304–306.
McDowell, P W & Hope, V. 1993. The location and delineation of Karst and solution collapse features by acoustic tomography. Proc 4th Multidisciplinary Conff on Sinkholes and the Engineering and Environmental Impacts of Karst, Florida, Jan 1993. 123–129. Balkema, Rotterdam.
McDowell, P W & Millet, N. 1984. Surface ultrasonic measurement of longitudinal and transverse wave velocities through rock samples. International Journal of Rock Mechanics, Mining Sciences and Geomechanics Abstracts, 21, 223–227.
Macgregor, F, Fell, R, Mostyn, G R, Hocking, G & McNally, G. 1994. Estimation of rock rippability. Quarterly Journal of Engineering Geology, 27(2), 123–144.
Mcguffey, V C, Modeer, V A & Turner, A K. 1996. Subsurface exploration. In: Turner, A K & Schuster, R L (eds) Landslides, Investigation and Mitigation. Transportation Research Special Report 247. National Research Council, 231–277.
McMechan, G A, Gaynor, G C & Szerbiak, R B. 1997. Use of groundpenetrating radar for 3-D sedimentological characterisation of clastic reservoir analogues. Geophysics, 62(3), 786–796.[CrossRef][ISI][GeoRef]
McNeil, J D. 1997. The application of electromagnetic techniques to environmental geophysical surveys. In: McCann, D M, Eddleston, M, Fenning, P J & Reeves, G M (eds) Modern Geophysics in Engineering Geology, Geological Society, London, Engineering Geology Special Publications, 12, 103–112.
Mcquillin, R & Ardus, D A. 1977. Exploring the Geology of Shelf Seas. Graham and Otman, London.
Meigh, A C & Skipp, B O. 1960. Gamma-ray and neutron methods of measuring soil density and moisture. Geotechnique, 10, 110–126.[Medline]
Midttomme, K, Roaldset, E & Aagaard, P. 1997. Thermal conductivities of argillaceous sediments. In: McCann, D M, Eddlestone, M, Fenning, P J & Reeves, G M (eds) Modern geophysics in Engineering Geology, Geological Society, London, Engineering Geology Special Publications, 12, 365–372.
Miller, R D & Steeples, D W. 1994. Application of shallow high-resolution seismic reflection to various environmental problems. Journal of Applied Geophysics Research, 31, 65–72.[CrossRef]
Miller, C H, Ramirez, A L & Bullard, T F. 1980. Seismic properties of the Springer Ranch Landslide, Powder River Basin, Wyoming. Professional Paper 1170-C. United States Geological Survey, Washington DC.
Miller, R D, Markiewicz, R D, Merey, C, Xia, J & Maples, C G. 1995. Improvements in shallow high-resolution seismic reflection through PC-based systems. Computers & Geosciences, 21(8), 957–964.[CrossRef][ISI]
Mohammadioun, B & Gariel, J C. 1996. An analysis of on earthquake and bedrock motion: a co-operative NRC/CEA experiment at Garner Valley (California). Proc 11th WCEE. Pergamon Elsevier Science Ltd, Oxford. Disc 2, paper 903.
Mossman, R W & Heim, G E. 1972. Seismic exploration applied to underground excavation problems. Proceedings of 1st North American rapid excavation and tunnelling conference, Chicago. 169–192. American Society of Civil Engineers and American Institute of Mining, Metallurgical and Petroleum Engineers.
Muller, K. 1977. Geophysical methods in the investigation search slope failures. Bulletin of the International Association of Engineering Geology, 16, 227–229.
Murphy, B J & Rosenbaum, M S. 1989. Attenuation from seismic refraction surveying as a ground investigation aid. Quarterly Journal of Engineering Geology, 16, 187–195.[CrossRef]
Neilson, P H. 1996. Computation of porosity and water content from geophysical logs, Yucca Mountains, Nevada. US Geological Survey. Open-File Report, OF0078, 64.
New, B M. 1971. Ultrasonic wave propagation in discontinuous rock. TRRL Laboratory Report, 720.
New, B M. 1985. An example of tomographic and Fourier microcomputer processing of seismic records. Quarterly Journal of Engineering Geology, 18, 335–344.
Nishi, K, Ishigriu, T & Kudo, K. 1989. Dynamic properties of weathered sedimentary soft rocks. Soils and Foundations, 29(3), 67–82.[GeoRef]
Nobes, D C. 1996. Troubled waters: environmental applications of electrical and electromagnetic methods. Surveys in Geophysics, 17(4), 393–454.[CrossRef][ISI][GeoRef]
Novosad, S, Blaha, P & Kneijzlik, J. 1977. Geoacoustic methods in slope stability investigations. Bulletin of the International Association of Engineering Geology, Krefeld 16, 229–241.
Olayinka, A I & Yaramanci, U. 2000. Assessment of the reliability of 2D inversion of apparent resistivity data. Geophysical Prospecting, 48, 293–316.[CrossRef][ISI][GeoRef]
Olhoeft, G R. 1992. Geophysical detection of hydrocarbon and organic chemical contamination. In: Bell, R S (ed.) Proc of the Symposium on the Applications of Geophysics to Engineering and Environmental Problems, Oakbrook Illinois. 587–595.
Onions, K R, Whitworth, K & Jackson, P J. 1996. Application of geophysical methods to site investigations of contaminated old collieries. Quarterly Journal of Engineering Geology, 29, 219–231.
Onodera, T F. 1963. Dynamic investigation of foundation rock in-situ. Proceedings of the 5th Symposium on Rock Mechanics, University of Minnesota, 1962. 517–533.
Paillet, F L. 1993. Using borehole geophysics and cross-borehole flow testing to define hydraulic connections between fractures zones in bedrock aquifers. Journal of Applied Geophysics, 30, 261–279.[CrossRef][ISI][GeoRef]
Parka, J O. 1988. Electrical response of a leak in a geomembrane liner. Geophysics, 53(11), 1445–1452.[CrossRef][ISI][GeoRef]
Pecker, A. 1991. Garner Valley — Downhole experimentation — Soil profile and mechanical characteristics. Géodynamique et structure, Project 03-90 Report No 1, Rev A.
Penn, S & Tucker, D. 1983. The application of geophysics to quarry overburden problems. Prospecting and evaluation of non-metallic rocks and minerals. Institution of Geologists, London, 149–156.
Pennington, D S, Nash, D F T & Lings, M L. 1997. Anisotropy of G0 shear stiffness in Gault Clay. Géotechnigue, 47(3), 391–398.
Phillips, J D & Fitterman, D V. 1995. Environmental Geophysics, Reviews of Geophysics. American Geophysical Union Supplement, 185–193, July 1995.
Piteau, D R, Mylrea, F H & Blown, I G. 1978. Downie Slide,Columbia River, British Columbia, Canada. In: Voight, B (ed.) Rockslides and Avalanches1 Natural Phenomena. Elsevier, Amsterdam, 365–392.
Poster, C & Cope, C. 1975. The location of backfilled quarries by high resolution gravimetry. The Arup Journal, 10, 7–9.[Medline]
Powell, J H. 1998. A guide to British stratigraphical nomenclature, Special Publication 149. CIRIA, London.
Pratt, R G & Chapman, C H. 1992. Traveltime tomography in anisotropic media — I Application. Geophysical Journal International, 109, 20–37.[ISI][GeoRef]
Prentice, J & McDowell, P W. 1976. "Geological and geophysical methods in the location and design of services". Underground Services (No 4), 15–18.
Prentice, J & McDowell, P W. 1977. "The investigation of potential bridge sites on the River Torridge at Bideford, Devon". Quarterly Journal of Engineering Geology, 10, 341–342.[GeoRef]
Press, W H, Teukolsky, S A, Vetterling, W T & Flannery, B P. 1996. Numerical Recipes in FORTRAN, 2nd edition. Cambridge University Press. 963 pp.
Rechtien, R D, Hambacker, K L & Ballard, R F, Jr. 1993. A highfrequency sparker source for the borehole environment. Geophysics, 58(5), 660–669.[CrossRef][ISI][GeoRef]
Reynolds, J M. 1994. Resolution and differentiation of sub-surface materials using multi-method geophysical surveys. In: Forde, M C (ed.) Proceedings of the Third International Conference on Re-use of Contaminated Land and Landfills, Brunei University. 63–67. Engineering Technics Press, London.
Reynolds, J M. 1997. An introduction to applied and environmental geophysics. John Wiley & Sons Ltd, Chichester. 796 pp.
Reynolds, J M & McCann, D M. 1992. Geophysical methods for the assessment of landfill and waste disposal sites. In: Forde, M C (ed.) Proceedings of the Second International Conference on Construction on Polluted and Contaminated Land, Brunet University. 63–71. Engineering Technics Press, London.
Ricketts, G A, Smith, J & Skipp, B O. 1995. Confidence in seismic characterisation of the ground. Proc Int Conff on Advances in Site Investigation. Thomas Telford, London.
Ricketts, G A, Smith, J & Skipp, B O. 1996. Confidence in seismic characterisation of the ground. In: Craig, C (ed.) Advances in site investigation practice. Thomas Telford Press.
Robbins, S L. 1980. Bibliography with abridged abstracts of sub-surface gravimetry (especially borehole) and corresponding in-situ density determinations. United States Geological Survey, Open File Report, 80–710.
Roberts, R L, Hinze, W J & Leap, D I. 1989. A Multi-Technique Geophysical Approach to Landfill Investigation. Proceedings of the Third Outdoor Action Conference on Aquifer Restoration, Groundwater and Geophysical Methods 3, Orlando, Florida, 22nd–25th May. 797–811.
Roberts, R L, Hinze, W J & Leap, D I. 1990. Application of the gravity method to the investigation of a landfill in glaciated mid-continentUSA. In: Ward, S H (ed.) Geotechnical and environmental geophysics, 2, Society of Exploration Geophysicists, Tulsa, 253–259.
Robery, P C & Casson, R B J. 1995. Methods of investigation using combined NDT techniques. In: Forde, M C (ed.) Proceeding of the Sixth International Conference on Structural Faults and Repair, 3rd–5th July 1995, 2, 3–15. Engineering Technics Press, London.
Romig, P. 1992. Engineering and environmental geophysics get top billing at SAGEEP. Geophysics: The Leading Edge of Exploration, 11, 36–37.
Rouse, W C, Styles, P & Wilson, S A. 1991. Microseismic emissions from flow slide — type movements in South Wales. Engineering Geology, 31, 91–110.[CrossRef][ISI][GeoRef]
Roussel, J M. 1968. Theoretical and experimental study of dynamic modulus of rock masses. Revue de lIndustrie Minerale, 50, 573–600.
Sasaki, Y. 1992. Resolution of resistivity tomography inferred from numerical simulation. Geophysical Prospecting, 40, 453–463.[CrossRef][ISI][GeoRef]
Sasaki, Y. 1994. 3-D resistivity inversion using the finite element method. Geophysics, 59(11), 453–463.
Sass, J H, Lachenruch, A H & Munroe, R J. 1971. Thermal conductivity of rocks from measurements on fragments and its application to heat flow determinations. Journal of Geophysical Research, 76, 3391–3401.[GeoRef]
Schneider, B. 1967. Contribution it l etude de massifs de la fondations de barrages. Transactions du Laboratoire de Geologie de la Faculte de Sciences de Universite de Grenoble, 7, Monsoir.
Schopper, J R. 1966. A theoretical investigation on the formation factor/permeability/porosity relationship using a network model. Geophysical Prospecting, 14, 301–341.[CrossRef][GeoRef]
Simpson, B, Atkinson, J H & Jovicic, V. 1996. The influence of Anisotropy on calculations of ground settlements above tunnels. Proceedings of Geotechnical Aspects of underground construction in soft ground, The City University, London. 591–595.
Site Investigation Steering Group 1993. Site investigation in construction Parts 1 to 4. Thomas Telford, London.
Sjogren, B A, Ofsthus, A & Sandberg, J. 1979. Seismic classification of rock mass qualities. Geophysical Prospecting, 27, 409–442.[CrossRef][ISI][GeoRef]
Skipp, B O. 1995. Acquisition choice and use of ground parameters for soil-structure interaction analysis. 10th European Conference of Earthquake Engineering, 425–440.
Slaine, D D, Pehme, P E, Hunter, J A, Pullan, S E & Greenhouse, J P. 1990. Mapping overburden stratigraphy at a proposed hazardous waste facility using shallow seismic reflection methods. In: Ward, S H (ed.) Geotechnical and environmental geophysics, 2, 273–280. Society of Exploration Geophysicists, Tulsa.
Stacey, T R & Noble, G W. 1975. Seismic evaluation of soil trenchability. Proceedings, 6th Regional Conference on African Soil Mechanics and Foundation Engineering, 2, 185–186.
Steeples, D W & Miller, R D. 1990. Seismic reflection methods applied to engineering, environmental, and groundwater problems. In: Ward, S H (ed.) Geotechnical and environmental geophysics, 1, 1–30. Society of Explor Geophys, Tulsa.
Steeples, D W & Nyqyist, J E. 1995. What Environmental Geophysics Can Do. Geotimes, 15–17, May 1995.
Stewart, I E, Williams, J R & Walker, C S. 1997. Seismic refraction in relation to geotechnical information (road) construction contracts. In: McCann, D M, Fenning, P & Cripps, J (eds) Modern Geophysics in Engineering Geology. Papers from the 30th Annual Conference of the Engineering Group of the Geological Society, Leige, Belgium, 1994. 337–346.
Stoll, R D. 1985. Sediment Acoustics. Springer -Verlag, Berlin. 153 pp.
Tatsuoka, F, Ochi, K, Kohata, Y & Wang, L. 1977. Experiments in underground excavation in sedimentary rock at Sagamihara. Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, 125(6), 223.
Taylor, S B, White, C C & Barker, R D. 1999. A comparison of portable and permanent landfill liner leak-detection systems. In: Durham, G N & Man, W A (eds) Field instrumentation for soil and rock. ASTM STP 1358 American Society for Testing and Materials, 1999.
Telford, W S, Geldart, L P & Sheriff, R E. 1990. Applied Geophysics, Second Edition. Cambridge University Press. 769 pp.
Titman, D J. 1994. Aerial thermometry — A cost effective approach to landfill site surveys. In: Forde, M C (ed.) Proceedings of the Third International Conference on Re-use of Contaminated Land and Landfills, Brunei University. 269–271. Engineering Technics Press, Londo.
Trantina, J A. 1962. Investigations of landslides by seismic and electrical resistivity methods. Field Testing of Soils, American Society for Testing Materials Special Publication 322, 120–134.
TRRL 1975. Probing ahead for tunnels; a review of present methods and recommendations for research. Supplementary Report 171 UC.
Turberg, P, Muller, I & Fluky, F. 1994. Hydrogeological investigation of porous environments by radio magnetotelluric-resistivity (RMT R 12-240 kHz). Journal of Applied Geophysics, 31(1–4), 133–143.[CrossRef][ISI][GeoRef]
Van, G P, Park, S K & Hamilton, P. 1991. Monitoring leaks from storage ponds using resistivity methods (short note). Geophysics, 56(8), 1267–1270.[CrossRef][ISI][GeoRef]
Veness, K J. 1996. The use of rapid surface geophysical surveys in ground investigations of large development and redevelopment sites. MPhil, Thesis. Middlesex University, 195 pp.
Von Herzen, R P & Maxwell, A E. 1959. The measurement of thermal conductivity of deep sea sediments by a needle probe method. Journal of Geophysical Research, 64, 15S7–15S63.
Vucetic, M & Dobry, R. 1991. Effect of soil plasticity on cyclic response. ASCE, JGED, 117(1), 89–107.
Walker, C S & Win, M A. 1997. A new standard in the practice of engineering seismic refraction. In: McCann, D M, Fenning, P & Cripps, J (eds) Modern Geophysics in Engineering Geology. Papers from the 30th Annual Conference of the Engineering Group of the Geological Society, Leige, Belgium, 1994. 425–434.
Ward, W H, Burland, J B & Gallois, R M. 1968. Geotechnical assessment of a site at Mundford Norfolk, for a proton accelerator. Geotechnique, 18(4), 399–431.[ISI][GeoRef]
Weaver, J M. 1975. Geological factors significant in the assessment of rippability. Civil Engineer in South Africa, 17, 313–316.
Wehr, W, Stein, U, Cudami, R & Bosinger, E. 1995. CPT, shear wave propogation and freeze probing to estimate void ratio in loose sands. International Symposium on Cone Testing, Sweden, Paper A78, 1–6.
Whiteley, R J. 1995. Environmental Geophysics: Challenges and Perspectives. Exploration Geophysics, 25, 189–196.
Wills, C J. 1998. Differences in shear wave velocity due to measurement methods: A cautionary note. Seismological Research Letters, 69(3), 216–220.[GeoRef]
Woodland, A W. 1970. The buried tunnel-valleys of East Anglia. Proceedings of the Yorkshire Geological Society, 37, 521–578.[GeoRef]
Worthington, M H. 1984. An introduction to geophysical tomography. First Break, 2, 20–26.[GeoRef]
Worthington, P F & Barker, R D. 1977. Detection of disused vertical mineshafts at shallow depth by geoelectrical methods. Geoexploration, 15, 111–120.[GeoRef]
Wyllie, M R J, Gregory, A R & Gardner, G H F. 1958. An experimental investigation of factors affecting elastic wave velocities in porous media. Geophysics, 23(3), 459–493.[CrossRef]
Yamaguchi, S. 1977. Determination of the location of drains and assessment of the effect of the work by repeated electrical resistivity surveys. Bulletin of the International Association of Engineering Geology, 16, 183–184.
Young, R P, Hill, J J, Green, A D & Middleton, R. 1984. Vibration monitoring in assessment of blasting efficiency, a new microcomputer-controlled radiotelemetric instrumentation system. Transactions of the Institution of Mining and Metallurgy, A202–A210, Section A, No 93.
Younger, P L. 1994. Minewater pollution: the revenge of Old King Coal. Geoscientist, 4(5), 6–7.[GeoRef]
Zalasiewicz, J A, Mathers, S J & Cornwell, J D. 1985. The application of ground conductivity measurements to geological mapping. Quarterly Journal of Engineering Geology, 18, 139–148.
| ||||||||||||||||||||||||||||||||||||||||||||